1pc CNC FY-730 Electronic Winding Machine Coil Winder With Diameter 0.03 -1.80mm Coil Winding Machine -------- ,Strong & Durable

.Maximum diameter of winding coil: 120mm .Maximum width of winding coil: 100mm . Wire diameter: 0.03-0.8mm .Counting range: 0-99999 circles (FY-730) Spindle speed: 1150 rpm; 1600 rpm .Stepless speed regulation Counting: 0-9999.9 circles (FY-740) 2. Installation: 1. The machine should be installed on a solid wooden workbench. There should be a pad between the workbench and the bottom plate of the winding machine to fix it, so as to reduce the vibration of the winding machine. There are 4 fixing holes on the bottom plate of the winding machine for fixing Install. 2. The sleeve shaft of the winding machine should be installed on the main shaft of the winding machine, and the fixing stud should be tightened. The winding sleeve shaft should be checked normally for looseness and bending, and the winding shaft should be kept concentric during operation. 3. Setting and use guide: (1) How to set the winding and the number of winding turns Tip: There will be a beep after the button responds. The setting button supports long press. 1. Set the number of winding turns (for example, set winding '1' to 100 turns). Press the reset button first, then press and hold the 'Setting' key, see [0] [ ] on the display (enter the 'winding' setting item.) Press 1 on the keyboard, see the display screen [1][ ] (The selection needs to set the winding to '1'.) Press the OK key, see the display screen [ ][ 0] (Enter the setting item of the number of turns of this winding.) Press 100 on the keyboard, see the display [ ] [ 100] (set the number of turns of the winding to '100') Press the "Enter" key on the keyboard to see the display screen [1] [100] (indicates that the number of turns of winding '1' is set to '100'. The first winding is set.) 2. According to the above methods , you can set 1-10 winding turns continuously, and repeat the setting of turns (the original set turns will disappear automatically after repeated setting). 3. After setting the number of winding turns, press the "Check" button to check whether the set number of winding turns is correct, or press the "Reset" button first and then press the 1-9 keys on the keyboard to search. The number of turns of the winding is reset (every time the viewing button is pressed, it will flash three times to view a set winding number of turns, which can be viewed in a loop). Related Products:wire stripping machine,cable stripping machine,wire binding machine,wire winding machine,heat shrink tube cutting machine ,electrical terminal crimping machine,automatic wire stripper,cnc winding machine,belt machine,wire strippers,wire stripper tool