2014-2018 Chevy Silverado Crew Cab Single 10" Sub Box with Harmony HA-F104 Sub, Kicker CX300.1 Amp & HA-AK10 Kit

Complete subwoofer package for 2014-2018 Chevy Silverado Crew Cab — single 10" sealed enclosure built to fit under the rear seat with downward-firing sub. Kit includes: 1 x 14-18 Chevy Silverado Crew Cab Truck Single 10" Sub Box Subwoofer Enclosure; 1 x Harmony Audio HA-F104 Flatline Series 10" Sub (700W peak / 350W RMS, Single 4 Ohm); 1 x Kicker CX300.1 CX Series Class D Subwoofer Amplifier (600 Watt max - Limited Stock); 1 x Harmony Audio HA-AK10 Complete 10 Gauge 600W Amp Install Kit (Nickel). Enclosure (vehicle-specific fit) - Designed for 14-18 Chevy Silverado Crew Cab Truck - Mounting location: installs under the rear seat, subs fire downward - Mounting depth: 6-1/2" - Internal air space (sealed): 0.74 Cubic Feet - Construction: high quality MDF - High quality twist knob / banana plug terminal cup (bare wire 'up to 10GA') - Exterior: high quality black carpet - Overall dimensions: 24-3/4" L x 16-1/2" W x 9-3/4" H Harmony HA-F104 10" Flatline Series Subwoofer - Power handling: Peak: 700 watts / RMS: 350 watts - Nominal impedance: Single 4 Ohm - Sensitivity: 87.1 dB - Frequency response: 25Hz-1.5Hz - Mounting depth: 4 1/16" - Mounting cutout diameter: 9 1/16" - Box volume recommendations: - Min sealed box volume (cu ft): 0.40 - Max sealed box volume (cu ft): 2.03 - Min vented box volume (cu ft): 1.1 - Max vented box volume (cu ft): 1.81 Kicker CX300.1 CX Series Single-Channel Class D Amplifier - RMS power rating: 4 ohms: 150 watts x 1 chan.; 2 ohms: 300 watts x 1 chan. - Max power output: 600 watts x 1 chan. - Pulse Width Modulated MOSFET power supply - LED indicators: power (green) and protect (red) - Variable bass boost: 0 to +12 dB at 40 Hz - Single channel operation with speaker-level (high-level) inputs and signal-sensing automatic turn-on - Preamp RCA outputs for daisy-chaining additional amps - 3-way protection circuitry: thermal, overload, and speaker short protection - Dual speaker terminals for easier multi-speaker hookup - Heavy duty aluminum alloy heat-sink - Nickel-plated RCA level inputs and nickel-plated screw terminals - Input sensitivity: Low level: 125mV-5V; High level: 250mV-10V - Variable low-pass filter: 50-200 Hz, 12 dB/octave - Subsonic filter: 24 dB at 25 Hz - CEA-2006 compliant - Frequency response: 25-200 Hz - Required wiring: 8 gauge power and ground - Dimensions: 7-3/16" W x 8-1/8" D x 2-3/8" H Installation kit - Harmony Audio HA-AK10 10 gauge install kit (Nickel) included for amplifier hookup Notes - This package is a vehicle-specific, sealed single-10" solution for the 2014-2018 Silverado Crew Cab. Enclosure and components are matched to the above specifications.