220VAC Pk400ac Automatic Double-Swing Gate AC Motor Control PCB Controller Board

Control board for double-swing / opener AC motors only (not suitable for sliding gate openers). Type Pk400ac. Manual is not included in the package and will be sent by email. This PCB works exclusively with our remote control system and is not compatible with other remotes. Engine performance: 200w. Duty rating: S2 15 minutes. Typical operating cycle: approx. 10 seconds per 90°. Maximum single leaf weight: 400 kg per wing. Maximum single leaf length: 2.5m. Drive components and safety: DSPs device, electronic timing tracker, worm gear transmission, end switch, mechanical limit switch, safety barrier and optional infrared sensor. Main supply: 110V/220V, 60Hz/50Hz. Remote control: single-button mode. Operating temperature range: -20 ~ + 50 centi degrees. Protection class: (as provided). Receiving antenna: 1st antenna, 2nd antenna grounded. External button switch terminals: 3. Door open button (normal open), 4. Door close button (normal open), 8. Stop button (normal open), 5. Common terminal. Infrared protection device terminals: 6. Infrared photocell in front of the door (close normally), 7. Infrared photocell behind the door (close normally), 9. Common terminal. Limit switches for main motors: 10. Open limit switch of main motor 1 (normal close), 11. Close limit switch of main motor 1 (normal close), 12. Open limit switch of main motor 2 (normal close), 13. Limit switch of main motor 2 close (normal close). Output power terminals: 17-18 power source (24 VAC). External accessories: 15-16 electric lock (12 VAC), 19-20 alarm lamp (220 VAC), 21-22 spotlight (220 VAC). Main motor wiring: 23-24-25 (common terminals) main motor 1, 26-27-28 (common terminals) main motor 2. Input power: 29-30 input power (220VAC), 31 grounded protection. Adjustment knobs: Tr1 — speed slowdown adjustment (turn clockwise for maximum); Tr2 — motor output power adjustment (turn clockwise for maximum; power reaches maximum in the 2 seconds before motor start).