58cc Gas Chainsaw 20'' Gasoline Powered Chain Saw 2 Cycle Engine Single Cylinder

Install the Jam Teeth in the Right Direction. Install the Guide bar. Install the Chain. Cover the Side Cover. Adjust the Chain Tightness. Tighten the Screw. 1. Push the Brake. 2. Move the on/off Switch to the on Position. 3. Pull the Choke Knob Fully out to Position. 4. Pull the Start Handle(Max 6 Times). 5. Push the Choke Knob Back Fully. 6. Pull the Starter Until the Engine Start. Color: Black and Red Style: Modern Model: 5800 Assembly Required: Yes Material: Nylon, Mn Steel, Aluminum Engine Type: Single Cylinder, Air-cooled, 2-Stroke Ignition System: Self-reset Pull Start Fuel Tank Capacity: 550ml/18.6oz Chain Fuel Tank Capacity: 140ml/4.73oz Bore: 45.2mm/1.78inch Volume: 110db Power: 2.4kw Speed: 10000rpm Displacement: 58cc Oil Mixture: 25:1(90# Gasoline: Oil) Chain Length: 50cm/20inch Max. Cutting Diameter: 50cm/20inch Overall Size: 91*24*29cm/35.82*9.44*11.41inch Package Size: 50*27*30cm/19.68*10.63*11.81inch Gross Weight: 7.5kg/16.53 Lbs Net Weight: 7kg/15.43 Lbs 1* Gas Chainsaw 1* Chain 1* Guide bar 1* Chain bar Cover 1* Fuel Tank 1* Tool Bag 1 Pair* Gloves 1* Screwdriver 1* Funnel 1* English Manual Other Accessories for Assembly Please Read the Manual and Product Labeling Completely Before Installation and Use, and Pay Particular Attention to the Safety Instructions Included. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.