60CM Acrylic Bending Machine Hot Heating Bender Acrylic Bender For Plastic Plates PVC Plastic Board

Acrylic is one of the more commonly used plastic sheets on the market, so people call the equipment that bends acrylic acrylic bending machines; in principle, but in terms of the bending principle of acrylic and other plastic sheets, it is It is formed by heating and softening the plate and then bending it, so it is also called an acrylic hot bending machine. The above naming basis is relatively simple and is limited to one material: because acrylic plate is a type of plastic plate, it should be collectively called plastic plate hot bending machine or plastic plate bending machine. Instructions It is easy to operate and has both automatic and manual functions. In the automatic state, after the plate is placed, it will automatically bend and form within the preset time. The softening gap can be adjusted arbitrarily according to the thickness of the processed plate. The plate is fixedly heated to reduce deformation after forming. The angle setting is convenient and accurate through the handwheel, and the configuration relies on the ruler to ensure the uniformity of batch products. The use of infrared heating method greatly extends the service life compared with the furnace wire heating method. The working voltage is adjustable, thus avoiding the phenomenon of paste when folding thick plates. Equipped with a water circulation system and a water temperature overheating alarm system to ensure the safe use of the equipment Leakage protection function and safe use with grounding wire It is suitable for a variety of industries and can fold acrylic, PVC and other materials. Attention 1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2. For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection. 3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if it will not be used in a long time.