ANCEL HD8000 Diesel Heavy Duty HD Truck Scanner DPF Regen OBD2 Diagnostic Tool

Function: 🔥Read ECU Info 🔥Read Fault Code:Read DTCs，Clear DTCs. 🔥Clear learning value 🔥Read Live Data:Data Stream Waveform Display 🔥Actuations test 🔥DPF Stationary Regeneration 🔥DPF System Reset 🔥Read freeze frame data 🔥Data Manage:Can manage Vehicle App,Testing pictures,etc.Users can make effective management of files and storage. 🔥System Auto Detected:Automatically identify the vehicle model and information. 🔥Basic Reset 🔥Oil change 🔥Cylinder shut off test 🔥Cylinder compression test 🔥Cylinder balancing test 🔥EGR Solenoid Test （EGR-exhaust gas recirculation） 🔥EGR Pulse Ratio Test 🔥DPF Manual Forced（DPF-diesel particulate filter） 🔥DPF Normal Regeneration 🔥ABS bleeding（ABS-antilock brake system） 🔥Cylinder Cutout ✨DPF Service Function DPF Regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such us high temperature heating conbustion, fuel additive or catalyst reduce PM ignition conbustion) to stabilize the filter perfornance. Avoid costly replacement of the filters. Lower Overall Maintenance Costs. ✨DPF Service function Including : DPF regeneration, DPF reset, BlueTec, DPF related information reset, DPR state reset, Forced DPR regeneration, Differential pressure check, DPD forced regeneration etc. ✨DPF regeneration may be performed in the following cases: (a) The exhaust back pressure sensor is replaced. (b) The PM trap is removed or replaced. (c) The fuel additive nozzle is removed or replaced. (d) The cataytic oxidizer is removed or replaced. (e) The DPF regeneration MIL is on and maintenance is performed. (f) The DPF regeneration control module is replaced. OBDII Functions Check Mode 01 --- Request current powertrain diagnostic data. Mode 02 --- Request freeze frame information. Mode 03 --- Request emissions-related diagnostic code. Mode 04 --- Clear/reset emissions-related diagnostic information. Mode 05 --- Request oxygen sensor monitoring test results. Mode 06 --- Request on-board monitoring test results for specific monitored systems. Mode 07 --- Request emission-related diagnostic trouble codes detected during current or last completed driving cycle. Mode 08 --- Request control of on-board system, test or component. Mode 09 --- Request vehicle information. Mode 10--- Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information. ✡️Tablet Parameters CPU: Allwinner A133P System: Android 13 Android 13 Memory: 2GB RAM & 64GB ROM Screen: 1280*800 1280*800, capacitive touch screen Wi-Fi: 2.4Ghz & 5Ghz & WIFI6 Bluetooth BT5.2 Battery: 3.7V, 6000mAh Size: 310*170*50 mm 💝ANCEL HD8000 VCI Box Parameter Processor: Arm Cortex-M33 Frequency: 180MHz Bluetooth: BT4.2 🎁Package List 1* HD8000 tablet scanner , 1*Diesel OBD 6pin & 9pin Adapter Cable , 1* Fit for ISUZU-3 Adapter , 1* Fit for ISUZU-20 Adapter , 1* Fit for VOLVO-8 Adapter Cable , 1* Fit for Cummins-3P F Adapter , 1* Fit for Cummins-3P M Adapter, 1* Fit for Hyundai-16 Adapter , 1* VCI Box , 1* Cigar lighter , 1* Jumper wires , 1* Power plug , 1* Type-C cable , 1* User Manual , 1* Battery Clip , 1* Protect Carry Box