Auxbeam QP002198 Universal On-Off Control 8 Switch Panel Electronic Relay System

Installation Guide Total power will go to 600w at 12V, 1200W at 24V and the maximum current is 60A. The maximum output current of groud 1 & 2 is 30A, the maximum output current of ground 3-8 is 20A. The recommended connection method is to decrease the current gradually from groud 1 to 8 groud. Make sure all the lamps are connectly before connecting the power cable.Guideline for connecting the red, yellow and white control cables 1. The red cable connects the master switch power cable to the ACC. If you want to light up the LED lamps before the car start-up, please connect the recommended because the higher the power is, the more the power of the battery will be consumed. 2. The yellow cable connects the width lamp to the master switch panel. 3. The white cable is the panel light brightness control cable. It can controls 3 brightness levels by each switching. You can disconnect the white cable in order to have the most brightness swicth panel if require.Includes 1 Set of 8 Gang on-off Control Switch PanelSpecifications Input Voltage : 12-24V DC Voltage : 30A Rated voltage: 12V 20A / 24V 10A Operating temperature: -25 deg -80 deg Waterproof rating: IP65 Weight: 4.2 lbs - SKU: AXBML1069