CNCEST Automatic Smart Shoe Film Machine+3 Rolls of Shoe Film Gold

Product size: 64*26*16.6cm/25.2*10.2*6.5in Product weight: 2.65kg (5.84lb) Place of use: home/hotel/office building, etc. Working method: pedal type Product material: ABS plastic Product features: easy to use, no space Applicable maximum shoe size: US shoe size 11/China shoe size 47 (length 28.5cm/11.22inch) Note:exclude Shoe mold rolls It is recommended to purchase shoe mold roll size: inner diameter 7.5CM(2.95inch）, outer diameter 10CM(3.94inch), inner diameter no less than 7.5CM(2.95inch）, outer diameter no more than 11CM(4.33inch), suitable for this model shoe mold machine Shoe film installation and use steps: Step 1: Lift the cover and put it aside Step 2: Pick up a roll of shoe film and align the small shafts on both sides of the shoe film with the slots on both sides of the machine (Put into the card slot on both sides) Step 3: Pull out the shoe film and lay it flat on the sponge pad of the shoe molding machine. Note: The shoe mold has the glue-adhesive side up, and the non-sticky side is attached to the sponge pad, so that it will stick to the sole. Cover the noodle cover Step 4: First, use one foot to step on the paved shoe film slightly, and pull the foot with the shoe film back all the way to the black shoe plate at the back (note that it is not too long to avoid cutting the sleeve) ) Shoe toe should be pressed against the machine and stepped on slightly, the shoe film is cut Precautions for use In order for you to use this product better, please follow the precautions below: 1. When installing the shoe film, put the glue side up and the non-stick side The sponge pad is attached to one side, don't reverse it, so as to stick the sole. 2. When sticking the shoe film to the foot, slowly pull back, the length of the shoe film cannot be longer than the black pedal, so as not to affect the cutting film. 3. Because the cutting blade is sharp, do not touch it by hand. Be careful not to let children play with it and pay attention to safety. After-sales service： Every shoe film machine of our company has been rigorously tested before facing the market, and if it is used correctly, it will generally not malfunction. If there is a failure during use, you can directly contact our company please.