Cosmo Built-In Dishwasher Easy Clean Stainless Steel Touch Controls

COS-DIS6502 FAQ: Q: Who do I call for warranty support? A: Your Cosmo dishwasher has a dedicated warranty support team. You may reach the support team by calling 1-855-877-4085. Q: Where can I find the model and serial number of my unit? A: The model and serial numbers can be found in one of two places: on the rear of the dishwasher, or on the dishwashers box. We recommend writing this information down so you have it for easy reference. Q: What do the error codes mean on my dishwasher? A: The error codes on your dishwasher are: Code Meaning Possible Cause E1 The water is taking too long to enter the dishwasher. Water faucet is not open fully. Water intake is restricted. Drain hose is clogged. E4 The water has overflowed. A leak in the dishwasher. Contact support or a qualified technician. E9 A button has been touched for more than 30 seconds. Anything (including water) is touching a button. Dry the control panel completely. Q: Where do I install the water inlet on my dishwasher? A: The hot water inlet on your dishwasher is located on the bottom and faces forward. To access the inlet, the dishwasher should be placed facing up. Q: What is the purpose of the white PVC pipe on the rear and of the dishwasher, towards the bottom? A: This PVC pipe houses a single screw and is only present for the assembly of the dishwasher at the factory. It has no function or significance to installation and can be safely disregarded. COS-DIS6502 Electrical Installation Troubleshooting 120V: No power or low power. Check that the unit is plugged in and the breaker is switched to ON. Turn the breaker to the OFF position and wait 5 minutes. Turn the breaker back to the ON position and attempt to use the unit again. Check that the voltage is correct for your unit according to the installation manual 110/120V, 60Hz, and 15 to 20 Amps. We advise that electrical installation be performed by a qualified, licensed electrician. If installation was not performed by a licensed professional, contact one as soon as possible to verify that the power is adequate for your unit and has been safely connected. COS-DIS6502 Troubleshooting COS-DIS6502 Help Docs Table of Contents.