DBX DriveRack PA2 Speaker Management Processor + (8) Rockville RCXFM20E-B 20 Foot XLR Cables

Package Contents: (1) DBX DriveRack PA2 Complete Sound Signal Processor Speaker Management System PA2; (8) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cables, Black, 100% Copper DriveRack PA2 overview: The DriveRack PA2 consolidates the processing needed between your mixer and amplifiers to protect, tune, and maximize loudspeaker performance. This generation adds improved AutoEQ and AFS algorithms, a new input-delay module for aligning FOH to backline, Ethernet-based control from Android®, iOS®, Mac®, or Windows® devices, and updated setup Wizards — giving you full mobile control and refined loudspeaker management in a compact unit. Key features (DriveRack PA2): All New Setup Wizard; Streamlined AutoEQ™; All New AFS™ (Advanced Feedback Suppression); Mobile Control (Android®, iOS®, Mac®, Windows®); dbx Compression; dbx Limiting; Graphic EQ; 8-Band Parametric EQ (adjusted when using the AutoEQ); Input 8-Band Parametric EQs (used for speaker tunings); Output Sub-Harmonic Synthesis; Crossover (supports full range, 2-way, and 3-way systems); Driver Alignment Delays. Specifications (DriveRack PA2): Input: (2) Line Inputs, (1) RTA Mic Input. Input Connectors: (2) Female XLR Line Inputs, (1) Female XLR RTA Mic Input. Input Type: Electronically Balanced, RF Filtered. Input Impedance: > 50 kOhm. A/D Converter: dbx Type IV Conversion System. CMRR: > 45 dB. Mic Preamp Phantom Power:: +15VDC (RTA). Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA). Output: (6) Line Outputs. Output Connectors: Male XLR. Output Type: Electronically Balanced, RF Filtered. Output Impedance: 120 Ohms. Max Output: 20 dBu. A/D Dynamic Range: 112 dB A-Weighted, 110 dB Un-Weighted. Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121dB with transient material, un-weighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW. Input Delay Length: 100ms. Alignment Delay: 10ms Per Channel (60ms Total). Sample Rate: 48 kHz. Rockville RCXFM20E-B cable description: These Rockville professional XLR microphone cables are constructed with 100% copper conductors for improved conductivity and long-term performance. Lower-cost alternatives often use CCA (Copper Clad Aluminum), which does not transmit signals as effectively. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, and that can negatively affect both sound quality and equipment longevity. RCXFM20E-B Features: Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable; XLR Connectors with Internal Strain Relief for Rugged Reliability; 100% Copper Conductors for Enhanced Signal Clarity; 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility; Length: 20 Ft; Color: Black. Documentation: Quick Start Guide available. Owner's Manual available.