Front Wheel Rim 6 x 16" — 6‑Lug (WHS043)

Overview: 6" x 16" front wheel rim with 6‑lug pattern. USA made. Cross reference: WHS043. Compatibility (some models that use a 6 x 16" 6‑lug rim): - Allis‑Chalmers: D17 (SN: 75001 & up), D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, I60, I600 and others using 6 x 16" 6 lug rim. - Case: 380CK, 430, 431, 440, 441, 530, 531, 540, 541, 730, 731, 741, 770, 830, 831, 840, 841, 870, 930, 970, 1030, 1070, 1175 and others using 6 x 16" 6 lug rim. - Cockshutt: (some models using 6 x 16" 6 lug rim) - Ford: 2310, 2600, 2610, 2810, 2910, 3230, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4000 SU, 4100, 4110, 4130, 4140, 4400, 4500, 4600, 4610, 4830, 5000, 5030, 5110, 5190, 5200, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 8000, 8200, 8600, 8700, 9000, 9700, 230A, 234, 334, 335, 530A and others using 6 x 16" 6 lug rim. - IH / Farmall: 385, 404, 424, 444, 460, 454, 464, 484, 504, 544, 560, 574, 584, 606, 656, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1206, 1256, 1456, 3088, 3288, 3688, Hydro 70, H84 Hydro, 86 Hydro, 100 Hydro and others using 6 x 16" 6 lug rim. - John Deere (2‑wheel drive models that may use this rim — check): 1020, 1120, 1250, 1450, 1520, 1530, 1650, 2010, 2020, 2120, 2030, 2040, 2240, 2440, 2630, 2640, 3010, 3020, 3120, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 5065M, 5075E, 5075M, 5078E, 5083EN, 5085E, 5085M, 5093EN, 5095M, 5101EN, 5105, 5105M, 5200, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5403, 5410, 5415, 5415K, 5415N, 5420, 5420N, 5425, 5425N, 5500, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5600, 5603, 5605, 5615, 5625, 5700, 5705, 5715, 5715HC, 5725, 5275N. Industrial: 21C, 300, 300B, 301, 301A, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 500, 500A and others using 6 x 16" 6 lug rim. - Massey Ferguson: 35 Turf Special, 50, 65, 85, Super 90, 202, 203, 204, 205, 2135, 3165 and others using 6 x 16" 6 lug rim. - MM (Minneapolis‑Moline): 335, 445, 4 Star, 4 Star Super, 5 Star, Big Mo 400, Big Mo 500, Big Mo 600, G1000, M5, M602, M670, U302 and others using 6 x 16" 6 lug rim. - Oliver: 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1850, 1855 and others using 6 x 16" 6 lug rim. - White: 2‑70, 2‑85, 2‑88, 60 and others using 6 x 16" 6 lug rim. OEM / Replacement part numbers: - Allis Chalmers: 70237405, 70235727 - Case: G45291, G57046 - Ford: 82005056, C5NN1007A - International Harvester: 364343R92 - John Deere: JD1293, JD3039 - Massey Ferguson: 183027M91, 509893M91 - MM: 10A9409, 10A9839, 10A27292, 11A989, 10A22565 - Oliver: 100014A, 30‑3040003 Fitment notes and measurements: - Rim width: measure from bead to bead on the inside (do not measure outside to outside) to determine actual width. - Pilot hole (6" x 16", 6‑lug): 4.625". - Bolt circle: 6". - Backspacing procedure: lay the wheel flat with the back of the wheel facing up, place a straightedge across the wheel, then measure from the back side of the mounting surface to the straightedge. Backspacing = 4.75". This item fits a wide range of tractors listed above; confirm fitment against your machine's specifications before ordering.