GODIAG GT100+ OBDII Breakout Box, OBD CAN Breakout Box, OBDII Protocol Detector ECU Bench Programming Tool

ECU Bench Programming: GT100+ can power an ECU on the bench, it is capable of diagnosing, vehicle immobilizer and security work. Whether it is on the bench with the included power adapter, or in the vehicle with OBDII port supplied power. Added CAN BUS and K-LINE Protocol: GT100+ not only check all OBDII diagnostic socket pins, but also non-standard OBD2 protocols, like the port 1,9,3,11,12,13 and 8. So, it can test CAN BUS and K-LINE protocol. Verifying communication, power, grounds Before connecting to your costly scan tools, you can use GT100+ to verify the networks are communicating properly, or there is proper power and grounds being supplier to the box assembly. Easy operation with Plug& Current Display Compared with similar tools, GT100+ OBDII Breakout box features with simple operation and additional features for doing ECM, ECU repair on vehicles. GT100+ breakout box connects with ECU module by banana plug or DB25 connector, so it can provide power to ECU and display electronic current value. Power ECU when Replacing Battery The auxiliary power supply aims at supply power to the vehicle through GT100+ OBDII breakout box before replacing the battery to sustain the power supply to the vehicle. The specification of GODIAG GT100+ Parameter: Working Voltage: DC 9V-24V Work and power: 0.5-0.6W Adapter power: Input AC 100V-240V, Output DC 12V 1A Operating temperature range: -20 to 70℃ Storage temperature range: -40 to 85℃ Dimension: 23cm*18cm*7cm Package includes: 1 pc×Host 1 pc×OBDII 2-in-1 extension cable 1 pc×Colored jumper cable 1 pc×Resistance 120 ohm 6 pc×Banana plug 24 pcs×Wire accessories, Dupont 2.54mm connector female pins