High-Frequency 1000W Induction Heater Driver Module with Fan — Stable Flameless Heating

Overview: 1000W high-frequency induction heating driver module with cooling fan, designed primarily for induction heating applications. Electrical input: DC 12V-40V. Input current: 50A (short time). Recommended input voltage range: DC 24V-36V. Power supply and current guidance: heating power must be sufficient for your application. As a reference, expected input currents are: 20A when using a 12V supply; 30A when using a 24V supply; 50A when using a 36V supply. Actual current draw depends on use conditions. Use a protected power supply whenever possible; avoid low-current switching supplies without protection. Do not use batteries for power. Operating voltage requirement: ensure the working voltage remains above 11V — this refers to the voltage under load (with the coil or heating object connected), not the no-load power supply voltage. Cooling and connections (long-term use): for continuous operation, use copper piping and water cooling. A copper tube with a 10mm diameter can be fitted onto the copper post at the output. If the copper tube diameter is less than 4mm it may be welded to the copper clip and secured on the copper post. Tubes with diameter less than 2mm can be connected directly to the output terminal. Model selection notes: this unit is intended mainly for heating. If your required heating power is under 300W, consider other models in our store. For high-voltage packaging applications, choose alternative models — the typical high-voltage package power rating is less than or equal to 200W, and attempting higher power in those packages can easily cause damage.