KIPLINK 4x4 HDMI Matrix Switcher (4K UHD) — 4 Inputs, 4 Outputs

Overview: The KIPLINK 4x4 HDMI Matrix Switcher lets you connect four HDMI sources to four displays and independently route any input to any output. Built for easy installation, it supports 4K Ultra HD and offers multiple control methods for flexible operation. Key Features: - 4 Inputs, 4 Outputs: Attach and switch among four HDMI source devices and four HDMI screens. - 4K Ultra HD Support: Supports resolutions up to 4K. - Independent Switching: Any input can be sent to any output at the same time. - Multiple Control Options: Operate the unit from the front panel, with the included IR remote, or via RS232 serial commands. - Plug and Play: No drivers or additional software required for setup. - Status Display: Front-panel LEDs show the active input/output routing. - Preset Saving/Recalling: Store and quickly recall commonly used routing configurations. Specifications: - Input Ports: 4x HDMI - Output Ports: 4x HDMI - Supported Resolutions: Up to 4K (Specify exact resolutions and refresh rates, e.g., 4K@30Hz, 4K@60Hz, 1080p, 1080i, 720p, etc.) - HDMI Version: (Specify the HDMI version, e.g., HDMI 1.4, HDMI 2.0) - HDCP Version: (Specify the HDCP version if supported) - Control Methods: Front panel buttons, IR remote control, RS232 serial control Operating Controls and Functions: Front Panel: - Status Display: Shows the current input/output routing. - "All" Button: Selects the same input for all outputs. - "Preset" Button: Saves the current configuration as a preset. - "Recall" Button: Recalls a saved preset. - "Enter" Button: Confirms selections. - Input Selection Buttons (for each output): Selects the input for the corresponding output. Rear Panel: - HDMI Inputs (x4) - HDMI Outputs (x4) - IR Receiver Port - RS232 Port - Power Input Package Contents: - 1x KIPLINK 4x4 HDMI Matrix Switcher - 1x IR Remote Control - 1x Power Adapter - 1x User Manual