Load Cell 6 Digit LED Display Indicator Value Weight Controller Relay 4-20mA RS485 Output Transmitter ,High Accuracy

1.Specifications: Input signal 0-2.5MV/V Excitation 5V/100mA Measurement accuracy 0.1% Sampling rate 10 times or 80 times/second can be set Display mode Single row red LED display. Main display window display ran: -9999~29500 On-off input 1 way input, short circuit is effective.(selective assembly) On-off output Can choose 3-way relay or OC output, relay contact AC OC output driving 100mA/48V Transmitting Output 4-20mA, 0-20mA, 0-5V, 0-10V, 12bit accuracy, driving load500. Communication Working Environment environment temperature: -20-50; relative humidity85%RH; Avoid strong caustic gas. Working power supply AC power consumption5W Structure Panel mounting / cabinets mounting, plastic shell, dimension 96*48*84mm,Cut size:92×45mm 2. Operation panel: K1 key Parameter modification key:In standby mode, long press this key 3 seconds, then Enter the parameter modification interface. Specific parameter setting, Please refer to(3.1) K2 key Aligning key:In standby mode, long press this key 3 seconds, then Enter calibration interface, Specific parameter setting, Please refer to(4.1) K3 key Additional key:In parameter mode, to add value. In standby or measuring mode, to switch to see basic information. K4 key Shift key:In parameter mode, shift selects the value that needs to be modified. At this time, the data bit selected to be modified is blinking. Reset key:In standby or measuring mode, to reset. 3. Cable Connection: Related Products: weighing controller,load cell indicator,load cell,load cell sensor,weight sensor,weighing controller,load cell weight sensor,load sensor,weight indicator,weighting sensor load weight cell electronic,load cell weighing sensor