MFC 4x Front And Rear Splash Guards Mud Flaps Compatible With For Chevy Corvette C8 2020-2022 Replace for OEM 84263453 84263457

Splash Guards Installation: 1.Note: Do not use power tools to install splash guard fasteners 2.Note: Max torque on M4.2 Screw is 3.0 N m Front Installation Procedure 1.Turn front tire to provide clearance. 2.Clean and degrease body panel where splash guards are to be located. 3.Use 7 mm socket to remove screw in location(A). Retain fastener. See Step 1. 4.Use plastic trim removal tool to dislodge the existing stone protector panel clips from fender. Remove the existing stone protector. Take care not to damage paint. See Step 2. 5.Guide splash guard tabs into wheel liner slots. See Step 3. 6.Align splash guard clips with clip insertion holes and snap splash guard in. See Step. 3. 7.Reinstall fastener in location(A). See Step 4. Rear Installation Procedure 1.Clean and degrease body panel where splash guards are to be located. 2.Use 7 mm socket to remove screw in location(A). Retain fastener. See Step 1. 3.Use plastic trim removal tool to dislodge clips from rear fascia and remove existing stone protector. Take care not to damage paint. See Step 2. 4.Align and then insert the splash guard tab to the wheel liner slit. See Step 3. 5.Align splash guard clips with clip insertion holes and snap splash guard in place. See Step 3. 6.Reinstall fastener in location(A). See Step 4.