Mrcartool Refrigeration Digital Manifold Gauge Set 2-Valve HVAC Systems Vacuum Pressure Temp Test Meter Leak Tester,Builtin 90 Kinds of Refrigerant Data

Description: 【Humanized Design】: The brightness of the screen is adjustable, so it can be used even in a dark environment. When filling the refrigerant, you can observe the filling state of the refrigerant through the transparent visible window. Universal function button, only one side of the buttons can control two dials at the same time, which is convenient for the left and right hand operation 【Dual Screen Display】: L302 Refrigerant Gauge with dual screen design, that can test low-side pressure and high-side pressure, and can get the corresponding saturation temperature value. Blue arrow “LOW” for low-pressure rotary switch, red arrow “HIGH” for high-pressure rotary switch 【Three Working Modes】: The system comes with three common working modes: refrigerant pressure mode, vacuum percentage mode and leak detection mode.You can select the corresponding measurement mode according to your need.This is good tool HVAC and refrigeration technicians 【Switchable Unit】: L302 digital refrigeration manifold gauge with multi-unit conversion function, KPa, Bar, PSI, InHg, Kg, F/cm², Celsius, Fahrenheit, which can be easily switched as required and meet you different needs 【2 Valve & 3 Hoses】: 2-way valve block with three connections, can measure high and low pressure pipe. Comes with 3 colors hoses for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle, significantly improve test efficiency Specification: Pressure Units: KPa, Bar, PSI, InHg, KgF/cm2 Temperature Units: ℃, ℉ Test Range: 0 KPa~6000 KPa Resolution: 1KPa Accuracy: ±0.5% Overload: 10MPa Operating Temp: -20℃~60℃ Item Dimension: 6.7 x 2.4 x 6.7" Package Dimension: 8.8 x 5.5 x 8.5" Weight: 3.97 lbs Package Includes: 1 x L302 HAVC Manifold Gauge 3 x Manifold Gauge Hose 2 x Adapters (2 sizes) 1 x User Manual Notice: 1. Please operate in accordance with the requirements of the operating instructions or the Professional Personnel Guide. 2. The digital meter should be clean, the screen should be bright and. Clear, so that the data on the display screen is clearly. Use slightly alkaline detergent OR soapy water to wash the housing and connector. 3. The pressure gauge is a perishable product, you need to check it regularly to ensure its accuracy. 4. Please handle gently to avoid shock and fall. After use, please close all the buttons to improve the service life. 5. Plug the joint when not in use, to prevent foreign bodies from entering, please clean and Regularly replace the refrigerant tube, remove dirt and impurities in the valve.