Pure Sine Wave Inverter 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter

Important safety and installation notes: This inverter must never be tied into the utility power grid and the AC output should not be connected to or treated as mains. Both AC output conductors are live — there is no neutral/earth provided by the inverter, so do not use either output conductor as a grounding conductor. When wiring the inverter, connect it directly to the load; do not place a circuit breaker, residual-current device (leakage protection) or similar protective device between the inverter and the load, as forcing such connections can damage the unit rather than protect it. The inverter’s pure inductive-load capability is 95%. Battery and cabling guidance: The battery supplied with the inverter can deliver more energy than the device’s actual consumption. The DC feed from the battery demands heavy-gauge wiring — avoid lengthening the battery cables whenever possible. Use the original battery-to-inverter wiring; if you must extend the cable, the extension wire must be twice the diameter of the original cable. For best performance and to prevent voltage/current insufficiency, keep the battery-to-inverter run short (recommended not to exceed 1 meter).