Pure Sine Wave Inverter DC 12V/24V → AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter (Voltage Transformer)

Important safety and installation notes: This inverter must not be tied into the mains power grid and the AC output conductors should never be touched while live. Both AC output lines are live — there is no neutral/ground provided — so do not use either output as a grounding conductor. Install the inverter directly to your load; do not place an air switch or leakage-protection device between the inverter and the load, as doing so will not provide protection and may damage the unit. Battery and cabling guidance: The battery paired with this inverter can deliver more energy than the instantaneous consumption of the connected device. Because the DC output current can be high, avoid lengthening the battery cables. Use the original wiring from the battery to the inverter whenever possible. If an extension is unavoidable, the extension wire must be twice the diameter of the original cable and the recommended maximum extension length is 1 meter to prevent insufficient input voltage/current. Performance note: This pure sine wave inverter supports inductive loads up to 95% of its rated capacity.