Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Power Converter (Solar)

Important installation and safety notes: - Do not connect this inverter to the mains/grid and avoid touching the AC output conductors. The battery used with the inverter can deliver more energy than the immediate power draw of the connected device. - Both AC output conductors from the inverter are live; there is no separate grounded conductor. Do not use either output wire as a ground. - Connect the inverter directly to the load. Do not place an air switch or leak protection switch between the inverter and the load. Installing such devices in-line will not provide protection and may damage the inverter. - Our pure sine wave inverter has a pure inductive load capacity of 95%. DC wiring requirements: - The DC cable from the battery to the inverter must be of sufficient gauge. Do not extend the battery lead with thinner wire. Use the original wiring from the battery outlet to the inverter whenever possible. - Unauthorized extensions can lead to insufficient input current/voltage. If an extension is required, the extension wire must be approximately twice the diameter of the original cable. It is recommended that any battery-to-inverter extension not exceed 1 meter.