Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter (Wide Usage)

Important installation and safety information: Do not connect this inverter to the mains/power grid and avoid touching the AC output wiring. The battery supplied with the inverter can deliver more energy than the device’s actual power consumption. Both inverter AC outputs are live wires; there is no grounding provided — do not use either output as a ground conductor. Install the inverter directly to the load; do not place an air switch (circuit breaker) or a leakage protection (RCD/GFCI) device between the inverter and the load. Installing such protective devices in line will not provide the intended protection and can damage the inverter. The inverter’s pure inductive load capacity is 95%. The DC current from the battery is high, so do not lengthen the battery cables without proper sizing. Use the original wiring from the battery outlet to the inverter whenever possible. If you must extend the battery line, the conductor diameter should be doubled (twice as thick as the original wire); unauthorized extensions can cause insufficient input voltage/current. Recommended maximum extension length is 1 meter.