Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter

Important operating and wiring notes for this pure sine wave inverter: - Do not connect the inverter to the utility power grid. Never tie the inverter’s AC output to mains, and avoid direct contact with the AC output conductors — they are live. - Both AC output conductors are live lines; there is no neutral/earth provided from them. Do not use either output conductor as a ground. - The battery connected to this inverter may supply more energy than the connected device consumes. Because the inverter draws high DC current from the battery, use heavy-duty wiring from the battery to the inverter and avoid intentionally lengthening that cable with thin wire. - If you must extend the battery cable, the extension must use wire with approximately double the diameter of the original wiring to avoid voltage drop and insufficient current. From the battery terminal to the inverter it is best to keep the factory/original cable; any extension is recommended not to exceed 1 meter. - Do not place circuit breakers, residual current (leakage) protection devices or similar switches between the inverter and the load. Installing such protection in the middle can fail to protect and may damage the inverter. - Pure inductive load capability: 95% (the inverter's capacity for pure inductive loads is 95%).