Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Power Converter Solar Inverter, Wide Usage

Important installation and wiring notes: Do not connect this inverter to the mains power grid, and avoid touching the AC output conductors while the unit is operating. Connect the inverter directly to your load — do not place a circuit breaker (air switch) or a leakage protection device (RCD/GFCI) between the inverter and the load. Installing such devices in-line will not provide protection and can damage the inverter. Electrical output details: Both AC output conductors from the inverter are live wires; they are not to be used as a ground. The battery paired with the inverter can deliver more energy than the instantaneous consumption of the connected device. Battery cable and extension guidance: The DC wiring from the battery to the inverter must remain short and of adequate gauge. Do not lengthen the battery cable with the same thin wire — unauthorized extensions can cause insufficient input voltage/current. If an extension is unavoidable, the extension conductor’s diameter must be about twice that of the original wiring, and it is recommended the total DC cable length not exceed 1 meter. Performance note: Pure sine inverter inductive load capacity is 95%.