Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter

Safety and installation notes: This inverter must not be tied into the utility power grid and you should avoid touching the AC output conductors directly. The battery paired with the inverter may be capable of delivering more energy than the connected device consumes. Both AC output conductors are live (there is no neutral/ground conductor provided) — do not use either output lead as a grounding conductor. Connect the inverter directly to your load; do not place air switches or leakage-protection devices between the inverter and the load. Installing such devices in-line will not provide proper protection and can damage the inverter. For pure inductive loads the sine-wave inverter supports up to 95% of its rated capacity. DC cable guidance: battery-side currents are high, so avoid extending the battery cables. Use the original wiring from the battery terminals to the inverter whenever possible; unauthorized extensions can cause voltage drop and insufficient input current. If an extension is unavoidable, the extension conductor must be roughly double the original cable diameter, and the total extension length is recommended to be no more than 1 meter.