Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W, 3000W, 4000W, 5000W Solar Power Converter

Important installation and safety notes: This inverter is not intended for connection to the utility grid — do not backfeed or tie the unit into mains power. The AC output conductors are live; avoid touching the output lines and do not use either output as a grounding conductor. Battery and cabling guidance: The battery paired with the inverter may be capable of supplying more energy than the connected equipment consumes. Keep DC battery leads as short as possible and use the original wiring from the battery to the inverter. Unauthorized cable extensions can cause voltage drop and insufficient input current. If an extension is unavoidable, the extension cable must have at least twice the cross-sectional diameter of the original wire, and the recommended maximum length is 1 meter. Connection and protection devices: Connect the inverter directly to the load — do not place a circuit breaker (air switch) or residual current/leakage protection device (RCD/ELCB) between the inverter and the load. Installing such devices in-line may not provide proper protection and can damage the inverter. Performance note: The pure sine wave inverter has a rated pure inductive load capability of 95%.