Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter Voltage Transformer

Important safety and installation notes: Do not connect this inverter to the AC power grid and avoid touching the AC output terminals. Both AC output lines are live conductors — there is no neutral/earth output — so never use either output as a ground connection. Connect the inverter directly to your load; do not insert circuit breakers or residual-current (leakage) protection devices between the inverter and the load, as doing so can prevent protection and may damage the unit. The inverter’s pure inductive load capability is 95%. Use the original, short battery wiring from the battery to the inverter whenever possible. Lengthening the battery cable is discouraged; if an extension is unavoidable, the extension cable’s diameter must be doubled compared with the original wire and the total extension should preferably not exceed 1 meter. The battery can deliver more energy than the device’s instantaneous consumption, and DC output wiring must be thick enough to handle the required current; do not extend wiring with undersized cable to avoid voltage drop or insufficient input current/voltage.