Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W · 3000W · 4000W · 5000W Voltage Transformer Power Converter for Solar

Important installation and safety information — read before use: 1) Do not connect this inverter to the utility power grid. Also avoid touching the AC output conductors directly. 2) The battery paired with the inverter may be capable of supplying more energy than the measured consumption of the connected device. 3) Both AC output lines of the inverter are live. There is no protective earth provided via these outputs — do not use either output conductor as a ground. 4) Connect the inverter directly to the load. Do not place an air switch (circuit breaker) or a leak protection (residual current) device between the inverter and the load. Forcing such devices into the circuit will not protect the system and can damage the inverter. 5) For pure inductive loads the sine wave inverter can operate at up to 95% of capacity. 6) Battery DC output demands heavy-gauge wiring. Do not lengthen the battery cable using thin wire. Use the original cable from the battery outlet to the inverter. Unauthorized extensions can cause voltage drop and insufficient input/current voltage. If an extension is absolutely required, the extension conductor’s diameter must be roughly doubled (twice as thick as the original wiring). It is recommended that any extension not exceed 1 meter.