Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W, 3000W, 4000W, 5000W Solar Power Converter (Wide Usage)

Important safety and installation notes: • Do not connect this inverter to the utility power grid or tie its AC output into mains wiring. Do not connect the inverter AC output to live building wiring. • Both AC output conductors from the inverter are live; there is no separate earth/neutral provided. Never use either output conductor as a grounding conductor. • Avoid placing a circuit breaker or residual-current/leakage protection device between the inverter and the load. Installing such protective devices in the middle may not work as intended and can damage the inverter. • The inverter’s capability to handle pure inductive loads is 95%. Wiring and battery cable guidance: • The DC cable from the battery must carry high current. Do not extend the battery cable with thin or undersized wire. Use the original cable from the battery outlet to the inverter whenever possible. • If you must lengthen the battery cable, the extension wire must be doubled in diameter compared to the original wiring. Unauthorized or undersized extensions can cause insufficient input current/voltage. • For reliability, keep any DC cable extension short — it is recommended not to exceed 1 meter. • Note: the battery supplied with the inverter can deliver more energy than the instantaneous power consumption of the connected device; ensure battery, cabling, and load are matched to avoid overload.