Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Power Converter (Solar Voltage Transformer)

Overview: Pure sine wave inverter for converting DC 12V/24V to AC 220V, available in 2000W, 3000W, 4000W and 5000W variants. Ideal for solar and off‑grid power conversion. Important safety and installation notes: - Do not connect this inverter to the utility power grid or tie its AC output to the mains. Also avoid physically touching the AC output conductors. - Both AC output conductors are live; there is no separate earth/ground conductor provided. Do not use either output line as a grounding conductor. - The inverter should be connected directly to the load; do not insert a circuit breaker (air switch) or a leakage protection (RCD) device between the inverter and the load. Installing such devices in the middle can prevent proper protection and may damage the unit. - The battery connected to this inverter may be capable of supplying more energy than the device’s actual consumption. Ensure compatible protections and correct wiring. Wiring and cable extension guidelines: - The DC cable between the battery and inverter must meet high current requirements. Prefer using the original cable supplied from the battery outlet to the inverter and avoid lengthening it. - Unauthorized cable extensions can cause voltage drop and insufficient input current. If an extension is unavoidable, the extension conductor’s diameter must be doubled compared to the original wiring. - It is recommended that any DC cable run not exceed 1 meter. Performance note: The inverter’s pure inductive load capacity is 95%.