Rockville CAR-EQ-OKE 7-Band Car Karaoke EQ w/ Bluetooth + Rockville RMC-XLR Wired Microphone Kit

Package contents: (1) Rockville CAR-EQ-OKE Car Audio 7-Band Equalizer with Bluetooth and mic input for karaoke, (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone with (2) cables, equalizer mounting screws and bracket, owner’s manual, and warranty card. Also included with the microphone: fully metal wired mic, (2) 100% OFC Copper Mic cables (XLR to + XLR to XLR ), mic clip, plastic carry case, owner’s manual, and warranty. CAR-EQ-OKE Equalizer highlights: Bluetooth audio streaming from any smartphone or Bluetooth-enabled device with high-quality transmission, long range and low distortion. Dedicated microphone input with mic volume control and an Echo effect knob ideal for karaoke. Seven adjustable EQ bands at 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz and 12KHz; each band adjustable from -12dB to +12dB. Built-in crossover and subwoofer level controls plus a 7-volt line driver. Front, rear and sub pre-amp outputs and an AUX input with a gain knob to set aux volume. Blue LED illumination on each rotary control, sturdy metal chassis and premium rotary knobs. Includes mounting brackets and screws for straightforward installation. CAR-EQ-OKE technical specifications: Frequency response: 20Hz TO 20KHz +\/− 1dB. S\/N Ratio: 95 dB. Crossover Roll-Off: 12dB per octave. Input impedance: 10K. Input sensitivity: 200mv per channel >7V. THD: 0.01%. Input: 12V. Output: 12V. Power requirement: 11-16V DC. Unit dimensions in inches: 7.08 x 5.51 x 1.26. RMC-XLR Microphone features: Rockville RMC-XLR high-end metal handheld wired microphone with exceptional sound. M-56 cartridge in a full metal body. Type: dynamic. Neodymium magnet. Polar pattern: uni-directional. Frequency Response: 80 - 13Khz. Impedance: 600 Ohms 30%. Sensitivity: -72 3dB. Comes with a high-quality plastic carry case that safely stores the microphone and cable, plus a heavy-duty standard-size microphone clip. Stand-mountable design. Cables and accessories: Two 10 Feet XLR cables (XLR to Cable, XLR to XLR) made with 100% OFC oxygen free copper for a clear, distortion-free signal. Cable is 5 MM thick with cover (22 AWG standard mic cable). XLR connectors are solid and durable. Solid plastic mic clip construction with copper insert (part that screws to the mic).