ROP Shop Vertical Pressure Washer Pump Kit for Briggs & Stratton 207365GS / 193568GS / 189970GS — 2800 PSI, 2.3 GPM

Replacement vertical pressure-washer pump assembly from The ROP Shop, engineered for Briggs & Stratton engines 207365GS, 193568GS, and 189970GS. This rear-facing pump (water inlets/outlets exit the rear of the engine) mounts vertically and requires at least 5.5HP to achieve rated performance. See images 2 and 3 for additional mounting details. Includes: (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube, Hose & Keyway; unit shown in the first image. Key performance specifications: - Maximum Pressure: 2800 PSI - Maximum Flow: 2.3 GPM - Maximum Pump Speed: 3400 RPM - Shaft Diameter: 7/8" Shaft - 3 Bolt Pattern: 7 11/16" x 6 3/16" x 6 7/16" & 4" Center to Each Outer Hole - Maximum Water Temperature: 140° F - Inlet Connection Type: Standard Garden Hose - Outlet Tube Connection: 22mm Male Mounting notes: Depending on your engine configuration, you may need longer bolts and spacers (washers) to clear a longer shaft or prevent the pump legs from contacting the frame or engine. Failure to add required spacers can place stress on the pump legs and cause breakage. Spacers and longer bolts are not included; they can be sourced at a hardware store. Common bolt sizes used for installation: (2) 5/16"-18 x 2-1/2", and (1) 5/16"-18 x 3-1/2". Additional details: The pump head is reversible (can be flipped). Some engine models require removal of the pump to service engine oil. Safety warning: Do not operate this pump above its maximum PSI rating. Running the pump beyond 2800 PSI can cause pump damage (not covered by warranty) and/or serious bodily injury.