TFCFL 1.5HP Single Voltage Energy-Saving Pool Pump for In/Above Ground Pools

Read the operating manual in full before use and follow all safety instructions carefully. Prior to installing the water piping, install the adapter on both the water pump outlet and inlet. Place the nut onto the inner connection, apply glue to the pipe and wait until the adhesive bonds to the pipe, then screw the pipe assembly to the pump. This product must be connected only to a grounding-type receptacle protected by a ground-fault circuit interrupter (GFCI). To minimize the risk of electric shock, install the pump at least 10 feet from the inside wall of the pool and do not use an extension cord. This pump is intended for permanently installed pools only and is not suitable for storable pools. Please allow slight color variation from photos and a manual measurement tolerance of 1-3cm; order only if these tolerances are acceptable.