TOOL1SHOoo Handheld Automatic Rebar Reinforcing Tying Strapping Machine Orange 12V 8-34mm

Bundling line installation: In the starting state, press the lock plate of the opened wire plate and open the plate cover. Take out the binding thread, tear open the packaging film, pull the thread straight about 10 cm, load it into the binding machine in a clockwise direction, and then put the thread into the guide tap tube. Note: When tearing off the packaging film, please hold the wire board tightly and do not loosen the wires. If the wires are scattered freely, it will cause the wires to stick to the wire board and spread. Insert the head of the conduit into the water pipe until it is plugged. Cover the board and tighten the locking piece. Pinch the wire forward with two fingers, press and hold the switch, and send the wire out. If you want to take out the wire board after completion, please press the locking piece, open the wire board cover, fix the wire slot on the side and pull it out. Maintain 1. Clean the machine regularly to keep the nozzle clean. 2. This product can not be placed randomly, so as not to cause damage to the parts. 3. Do not place the battery with other metal objects to avoid short circuit. 4. Non-professionals should not disassemble the machine at will to avoid damage. 5. When you encounter an unsolvable failure, please send it to a professional for repair. Instructions： steel bars, and the steel bars are hooked at a 45-degree angle. Note: There are no obstacles between the jaws and the wire. Press the start switch, the reinforced tire mill will work (rotate, tighten the hinge, cut off) Note: Press only one button at a time, do not detect the jaw during work. After the automatic completion, pull the jaws out from the intersection of the steel bars, and then pull them back to complete the process and prepare for the next binding. When the binding process is not completed, please do not unplug the machine power cord in advance, otherwise the bundled goods will slip. Warm Tips 1.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. 2.100% Quality Assurance:We ship directly from the US warehouse. Feel free to contact us if you have any questions. We will provide the best suitable solutions for you. We are committed to provide best service for every customer! TOOL1SHOoo COLLECTION is a professional tool and equipment company aiming to provide quality products and services. If you have any problems, please feel free to contact us and we will reply to your in 24 hours.