Tuya Smart Thermoregulator — Flush-Mount Warm Floor Thermostat for Electric, Water & Gas Boiler (EP / WP / WPB)

Overview: Tuya smart, flush-mounted thermostat built for underfloor heating and boiler systems. Designed for straightforward installation and day-to-day use, it supports electric heating, water-based floor circuits, and gas boiler control depending on model selection. Installation: Flush-mounted into an 86 x 86 mm square or European 60 mm round mounting box (maximum). The unit secures with adhesive and screws and does not require complicated wiring. Operating modes: Choose between Programmable mode, Manual mode, and Temporary Manual mode. The Temporary Manual option lets you override the programmed schedule for a single period while retaining your main program settings. Sensor options: Supports three sensor configurations — Floor sensor, Air sensor, and Air control with floor limitation. An air sensor is included with every thermostat; only the EP model is supplied with a floor sensor. Model differences and outputs: - EP mode: Intended for electric underfloor heating. Output rating 16A, max. 3600 watts. Suitable for heating cable, heating film, etc. - WP mode: For water-based floor heating. Output rating 3A. Used to drive normally closed (NC) / normally open (NO) electrothermal actuators, valves, pumps, and similar devices. - WPB mode: For gas boiler systems. Output rating 3A. Used to switch boilers or heaters via dry contact. Reliability: Built-in power outage memory preserves your programming so schedules and settings are retained when power is restored.