UHF Wireless Headset & Handheld Mic System — 160ft Range, 1/8'' and 1/4'' Plug — For Speakers, Voice Amplifier, PA Systems (Not Supported AUX/iOS)

Overview: Portable UHF wireless microphone set with a high-sensitivity condenser mic, designed for voice amplification, PA systems and multimedia use (portable karaoke). Transmission distance is improved to 160 Feet (50m) and the system delivers stable signals with no delay, no radiation, anti-howling and anti-jamming performance, constant frequency and clearer audio quality. FCC tested. Compatibility and limits: Works only with microphone (Mic) jacks — will not output sound through Aux jacks. Not supported: iPhone, Android phones, MacBooks, laptops, Bluetooth speakers or AUX inputs. Note: Amp is not included. Easy operation: Power on both transmitter and receiver; the blue LED will flash for about 2 seconds while pairing and will stop flashing once matched — no further setup needed. Flexible mic configuration: The unit converts between headset and handheld modes (2-in-1 design) to suit different needs. Power and charging: Both transmitter and receiver contain built-in 400 mah rechargeable lithium-ion batteries, providing approximately 6 hours of operation. A dual micro USB V2.0 cable charges both units at once; full charge in about 2.5 hours. Connections and adapters: The receiver uses a 3.5mm (1/8'') plug; a 6.35mm (1/4'') adapter is included for use with larger amplifiers. Multiple-mic use: Up to 15 microphones can operate simultaneously — follow the user manual for channel switching (Max 15 Channel) and refer to (●Part 4 Advanced Operations To 4.2 Note B, Page 8) to avoid noise or loss of audio. Microphone pattern & applications: Built-in cardioid polar-pattern condenser microphone — suitable for conferences, speeches, podcasts, outdoor live events, yoga/dance instructors, voice amplifiers, promotions, games and more. Troubleshooting pairing/no sound: 1) Turn off both receiver and transmitter. 2) Power on the transmitter (handheld mic); the blue light will illuminate — long-press “+” until the blue LED flashes. 3) Turn on the receiver and wait for connection. 4) When both blue LEDs stop flashing, pairing is complete.