Wireless High And Low Voltage Current Ratio Tester ES1010

Tester High voltage detector Host (current clamp) Range 0.0mA～1200A（50/60Hz automatic） 0.0mA～20A Insolution 0.1mA 0.1mA Clamp Diameter φ50mm φ7.5mm Test Accuracy ±2%±5dgt ±0.5%±5dgt Sampling Speed 2 times/second Function：High-low voltage current transformer primary and secondary loop current, transformation ratio, polarity, phase, and on-line test; current and voltage ratio on both sides of transformer; on-line test; load current test Transmission type：Wireless transmission, straight line transmission distance 30m Shift gear：Automatic shift Power：DC6V 7# Alkaline battery（1.5V AAA×4） (Not included) DC7.5V 5 # Alkaline battery（1.5V LR6×5） (Not included) Test mode：Clamp CT Meter Dimension 87X37X262mm(W/T/H) Host::w100X35X204mm(W/T/H) Current clamp: 42X20X137mm(W/T/H) Display mode：LCD：128dots×64dots Blue screen backlight function, suitable for dark places LCD Size：62mm×44mm Ratio：Three kinds of transformation ratio display: (The primary and secondary circuit actually measured the current transformation ratio; the conversion ratio of the secondary circuit 5A; 10kV-YY transformer conversion ratio of 10kV/380V), the maximum ratio of 1:10 million Line voltage：Line test with insulation sheath below 60kV or bare wire current test below 35kV (must operate with insulation rod) Lead wire length：The lead wire of the current clamp 2 meter Weight：Total weight of instrument：3.1Kg（including insulation rob and instrument bag) High voltage detector：370g Host：409g Current clamp：180g Data interface：USB transmission Overflow display：Over-range overflow function: "OL A" symbol display Data storage：500 groups, press HOLD key to hold data, MR symbol display, press HOLD key to cancel hold Data review：Long press HOLD button to enter data review mode Data is full：Data full function: "FULL" symbol display No signal instruction："NO SIGNAL -----" is displayed when the host does not receive the transmission signal Automatic shut-down：About 15 minutes after power on, the meter will automatically shut down Battery voltage：When the battery voltage drops to 5.2V, the low-power indicator lights to remind you to replace the battery：When the battery voltage drops to 5.2V, the battery voltage is low symbol to remind to replace the battery Insulated rod：Five section insulation rods (5 meters in total) Insulation strength：AC 60kV/rms Line test：Line test with insulation sheath below 60kV or bare wire current test below 35kV (operate with insulation rod) Working temperature：-10℃～40℃ Storage temperature：-10℃～60℃ Relative humidity：0℃～31℃≦75%，31℃～40℃≦50% Suitable for safety regulations：IEC1010-1、IEC1010-2-032、pollution level 2、CAT Ⅲ(600V) IEC61326(EMC standard)